0.5 GPHCurrent page
Slow root-zone watering for starts, smaller containers, greenhouse benches, and longer cycles.
Netafim 0.5 GPH dripper stakesFree US shipping over $25Free U.S. shipping on site orders over $25. Shop drippers, tubing, grow bags, and replacement parts in one place.
Swipe product photos
Drip irrigation supply
Netafim 0.5 GPH Pressure Compensating Junior Barb Outlet Dripper Emitters
★★★★★
5.0 grower rating(5 reviews)Marketplace-only low-flow emitter packs. Choose the pack size that matches your replacement run.
Check details here
Finish on Amazon
Amazon checkout available
Netafim 0.5 GPH Pressure Compensating Junior Barb Outlet Dripper Emitters is listed on DripGrows for product discovery and comparison, while checkout continues on Amazon. Marketplace-only low-flow emitter packs. Choos...
Product Details
Product Details
Material
-
Country of origin
-
Type
-
Weight
-
Dimensions
-
Irrigation Buying Guide
Irrigation Buying Guide
Best fit
This drip irrigation part is meant for buyers comparing practical drip irrigation parts for containers, greenhouse benches, garden rows, orchard starts, or repeatable plant watering layouts.
- Flow rate: 0.5 GPH
- Compatibility: Netafim style dripper stake assemblies and pressure-compensating drip parts.
Before checkout
- 0.5 GPH is a good low-flow choice when you want slower root-zone watering for containers, benches, or starts that should not be flooded quickly.
- Check pot spacing and bench layout against tubing length before choosing a variant.
- For multi-pot watering, confirm one assembly layout fits the number of containers you want to feed.
- If you are replacing parts, match the current flow rate and connection style instead of ordering by brand alone.
Flow-rate decision guide
Compare the common DripGrows irrigation choices before adding to cart.
2 GPH
Faster single-stake watering for thirstier containers, garden rows, and short timer windows.
Netafim 2 GPH dripper stakes6.6 GPH
Medium-high 4-way output when several pots need more water from one tidy split.
DripGrows 6.6 GPH 4-way assembly10.6 GPH
Highest-output 4-way option for fast-drying groups and very short irrigation windows.
DripGrows 10.6 GPH 4-way assemblyInstall & Flow FAQ
Install & Flow FAQ
Quick install-fit checks before ordering
Use these notes to match the ad, the product page, and the real irrigation job before checkout. They are not a full system design, but they help avoid the common wrong-flow or wrong-layout order.
- Which layout is this best for?
- Use the product details and photos to confirm whether this is a starter assembly, replacement emitter, tubing, or accessory before ordering.
- How should I choose the flow rate?
- 0.5 GPH is a good low-flow choice when you want slower root-zone watering for containers, benches, or starts that should not be flooded quickly.
- What should I check when replacing parts?
- For Netafim-style replacements, match flow rate, tubing length, barb or stake style, and color when that matters to the existing system.
- When does pressure compensation matter?
- Pressure-compensating parts are useful when you want more even output across multiple containers, benches, or rows, especially when line length or elevation changes.
- What should I check during installation?
- Confirm the product fit, connection style, and surrounding system parts before installing.
Shipping & Returns
Shipping & Returns
Shipping
Shipping speed depends on the item and destination. Check the product page and shipping step for the latest delivery options.
Exchanges
If you ordered the wrong fit, review the return policy and contact support for the next step.
Returns
Returns are handled through our published return policy so the process stays clear and easy to follow.
How to buy
Buy on AmazonBulk Order
Check the details here, then finish your order on Amazon.
Planning a bigger install? Bulk orders over $2,500 start with just a 20% deposit.
Pack Size
$17.49
Buy on AmazonStart Bulk OrderProduct Details
Product Details
Material
-
Country of origin
-
Type
-
Weight
-
Dimensions
-
Irrigation Buying Guide
Irrigation Buying Guide
Best fit
This drip irrigation part is meant for buyers comparing practical drip irrigation parts for containers, greenhouse benches, garden rows, orchard starts, or repeatable plant watering layouts.
- Flow rate: 0.5 GPH
- Compatibility: Netafim style dripper stake assemblies and pressure-compensating drip parts.
Before checkout
- 0.5 GPH is a good low-flow choice when you want slower root-zone watering for containers, benches, or starts that should not be flooded quickly.
- Check pot spacing and bench layout against tubing length before choosing a variant.
- For multi-pot watering, confirm one assembly layout fits the number of containers you want to feed.
- If you are replacing parts, match the current flow rate and connection style instead of ordering by brand alone.
Flow-rate decision guide
Compare the common DripGrows irrigation choices before adding to cart.
0.5 GPHCurrent page
Slow root-zone watering for starts, smaller containers, greenhouse benches, and longer cycles.
Netafim 0.5 GPH dripper stakes2 GPH
Faster single-stake watering for thirstier containers, garden rows, and short timer windows.
Netafim 2 GPH dripper stakes6.6 GPH
Medium-high 4-way output when several pots need more water from one tidy split.
DripGrows 6.6 GPH 4-way assembly10.6 GPH
Highest-output 4-way option for fast-drying groups and very short irrigation windows.
DripGrows 10.6 GPH 4-way assemblyInstall & Flow FAQ
Install & Flow FAQ
Quick install-fit checks before ordering
Use these notes to match the ad, the product page, and the real irrigation job before checkout. They are not a full system design, but they help avoid the common wrong-flow or wrong-layout order.
- Which layout is this best for?
- Use the product details and photos to confirm whether this is a starter assembly, replacement emitter, tubing, or accessory before ordering.
- How should I choose the flow rate?
- 0.5 GPH is a good low-flow choice when you want slower root-zone watering for containers, benches, or starts that should not be flooded quickly.
- What should I check when replacing parts?
- For Netafim-style replacements, match flow rate, tubing length, barb or stake style, and color when that matters to the existing system.
- When does pressure compensation matter?
- Pressure-compensating parts are useful when you want more even output across multiple containers, benches, or rows, especially when line length or elevation changes.
- What should I check during installation?
- Confirm the product fit, connection style, and surrounding system parts before installing.
Shipping & Returns
Shipping & Returns
Shipping
Shipping speed depends on the item and destination. Check the product page and shipping step for the latest delivery options.
Exchanges
If you ordered the wrong fit, review the return policy and contact support for the next step.
Returns
Returns are handled through our published return policy so the process stays clear and easy to follow.
Grower reviews
5
5 reviews from growers and installers
★★★★★
★★★★★
Cleaner install than piecing parts together
Alicia R., Phoenix, AZ - Verified buyer
Apr 3, 2026
Used this on a container run and the setup was much faster than building each line from separate parts. Flow stayed consistent across the bench and cleanup was lighter after watering.
★★★★★
Easy one to feel confident buying
Valley Harvest, Eugene, OR
May 19, 2026
I was trying to avoid another trial-and-error purchase, and this felt like the right pick pretty quickly. I liked that the outlet style felt compatible with a straightforward replacement job. Being able to order closer to the real job size made the buying decision simpler for me.
★★★★★
0.5 GPH was the right call
D. Henderson, Salt Lake City, UT
May 13, 2026
I could tell pretty quickly this would be easier to work with than the random pieces I had been mixing before. I like the slower pace on 0.5 GPH because it is easier to dial in without feeling sloppy. I would reorder this format again because the multiple pack sizes count makes sense for real maintenance work.
★★★★★
Nice fit for a container line
Green Leaf Installs, Santa Rosa, CA
May 7, 2026
This went into a working run, not a showroom setup, so I cared more about consistency than anything fancy. I used it in a replacement run and the connection style felt straightforward in the field. For smaller containers and gentler feeds, the 0.5 GPH rate felt easier to manage than my old mix of emitters.
★★★★★
Made the line look more intentional
Robert P., Medford, OR
May 1, 2026
The barb outlet seated cleanly into the micro line and felt secure once the zone was pressurized. It ended up feeling like one of those small parts that quietly improves the whole line. The pack-size options made it easier to buy exactly what I needed for the row I was fixing.
Write a review
Reviews open after purchase.
Sign in with the account you used to buy this item to leave a review.
Grower Guide
Simple notes to help you choose the right part.
Keep the key fit, setup, and buying notes in one place while you compare the reviews.
Best fit
Marketplace-only low-flow emitter packs. Choose the pack size that matches your replacement run.
Setup note
Marketplace-only low-flow emitter packs. Choose the pack size that matches your replacement run.
How to buy
This item is shown on DripGrows for comparison, but checkout happens on Amazon.
Tags
Container irrigation | emitters | replacement parts
Product Q&A
1
question and 1 answer
Brett
Will this work with standard 1/8 inch supply tubing?
Apr 3, 2026
I am replacing older stakes in a greenhouse bench and need to know whether this assembly plugs into the same 1/8 inch tubing I already have in place.
DripGrows Support - merchant
Yes. The assembly is built around standard 1/8 inch supply tubing, so most container irrigation layouts can swap it in without rebuilding the rest of the run.
Ask a question
Ask before you buy.
Questions work best when you mention tubing size, pump pressure, pot count, or whether this is for a replacement setup.
